BOPET film

BOPET - biaxially oriented polyester, or more

accurately the polyetylenterephtalate films are generally one of the highest quality and most widely used materials for the manufacture of flexible packaging.

Foil tenolan ^®

BOPET film produced by FATRA Chropyně under the brand tenolan ^® are suitable for food packaging (N design) and for packaging of technical products. There is also implementing "antimony free".

Tenolan BOPET film may be further adjusted koroning technology, application of aqueous solutions of polymers and metallized. Vacuum coating Al is made to foil width 780 mm. It is implemented and discolored film in the mass, perhaps even a combination of the above adjustments. BOPET film adaptations acquire properties suitable for printing and improve their utility properties.

Packaging BOPET film tenolan ^®

• Tenolan OAN Food Packaging tl.6-150um width from 10 to 1600 mm
  Tenolan OAMN for food packing tl.8-150um, width 10 to 780 mm, metallized Al
  Tenolan OASN for food packing tl.2-23um, width from 10 to 1160 mm coating or PVDC primer
  Tenolan OCN for food packaging, industrial packaging tl.8-150um, width from 10 to 1600 mm colored in the mass
  Tenolan OCMN for food packaging, industrial packaging tl.8-150um, width 10 to 780 mm in the body, colored, metallized Al
  Tenolan OAKN for food packaging, industrial packaging tl.6-23um, width from 10 to 1600 mm koronned
  PIN tenolan separation foil in baking food tl.12-19um, width from 10 to 1600 mm
  Tenolan OCKN for food packaging, industrial packaging tl.8-23um, width from 10 to 1600 mm, colored in the mass / koronned

Density - specific gravity is 1.370 to 1.430 kg/dm3

Insulating films BOPET tenolan ®

Tenolan IA for elektroizolation, tl.6-50 um and 75 - 150um, width from 10 to 1600 mm

Density - specific gravity is 1.370 to 1.430 kg/dm3

Combustion products of poly (ethylene terephthalate) - PET

PET molecule contains only carbon, hydrogen and oxygen. Therefore, the perfect combustion only is carbon dioxide and water. As with other plastics, however, is quite difficult to achieve conditions approaching complete combustion. This is due to a small surface to volume ratio. Flue gas composition and content of toxic substances in them is highly dependent on combustion conditions. Based on these facts should be burned only in professional PET incineration.